Discussion on installation method of small CNC lathe foundation
1. Unboxing: Unpacking should carefully check the appearance of the box is intact.
2. In place: small CNC lathe lifting should be strictly in accordance with the instructions on the lifting method. Note the center of gravity and lifting position of small CNC lathes.
3. leveling: in accordance with the small CNC lathe instructions to adjust the level of small CNC lathe accuracy. Small CNC lathe on the basis of should be in the free state leveling, and then the anchor bolts evenly locked.
4. Cleaning: In addition to the parts required for the installation of the fastening of the workpiece (such as fastening screws, connecting plate, wedge, etc.), should clean the connection surface, the action surface of the rust coating, cleaning can not be used Metal or other hard scraper.
5. Connection: small CNC lathe disassembly parts and cables, tubing and trachea connection, small CNC lathe CNC system connection, CNC system out of the box check, external cable connection, power cord connection.
6. Confirm: Enter the supply voltage, frequency and phase sequence confirmation, input power supply voltage and frequency confirmation. China's power supply system is the exchange of 380V, three-phase; AC 220V, single-phase, the frequency of 50Hz.
Taian sea number of machinery main products: horizontal inclined bed CNC lathes, vertical CNC lathes, CNC turning centers, CNC pipe thread lathes, CNC milling machines, CNC machining centers, the purchase of CNC lathes to select the number of sea, choose Su total right, order Phone 13953800780.
More CNC lathe knowledge at http://www.htskcnc.com/